Key Features
- No "roll-off" capacitance versus electrolytic
- Resonant frequency of 1065KHz
- Ripple current to 30amps
- Capacitance as high as 50µf
- Voltage protection: 200%
- Low dielectric absorption
Home > Film Capacitors > 5MP1 Series
Great for High Current, High Capacitance & Low ESR Applications
These 5MP1 metallized polypropylene capacitors are manufactured by using special techniques in order to achieve the optimum characteristics for high current, high capacitance, low ESR applications.
For Filter designs where capacitance of 50µF or less is suitable for the circuit, type 5MP affords the opportunity to utilize capacitors with ESR’s orders of magnitude better than those of electrolytics, thus providing the opportunity to improve general system design. These unique capacitors also exhibit none of the “roll-off” of capacitance with frequency often associated with electrolytics.
In addition to the features which make type 5MP particularly suitable for switching applications, they are also characterized by low losses. Other advantages of polypropylene are long term stability, retrace, low dielectric absorption, and high insulation resistance.
Additional Information
Capacitance Range
- 1.0µF to 50.0µF.
- Capacitance is measured at 25°C at/or referenced to a frequency of 1kHz.
Capacitance Tolerance
- Standard tolerance is ±10%.
- Tolerances of ±20% and ±5% are available.
Operating Temperature Range
- -55°C to +105°C
Enclosure/ Construction
- Mylar tape outer wrap.
Voltage Rating
- DC working voltage ratings are from 100VDC to 400VDC
Quality Control
- Capacitors are tested 100% for:
- Capacitance tolerance
- Dissipation Factor
- Dielectric withstanding voltage
- Insulation Resistance
- Equivalent Series Resistance (ESR)
*Process and inspection data are maintained on file and available on special request.
Environmental
| Parameter | Method | Condition |
|---|---|---|
| Vibration | 204 | D |
| Shock | 213 | I |
| Humidity | 106 | – |
| Thermal Shock | 107 | A |
| Life | 108 | F |
| Reference MIL-STD 202 | ||
| EC PART NUMBER | EQUIVALENT MILITARY DESIGNATION | CAP µF | D | L | Lead Dia. | ESR Ohms 20-100 kHz Max | Fres kHz | I PEAK AMPS | dv/dt (V/µs) |
| 5MP12D105_ | CFR13ALB105_ | 1 | 0.469 ±0.062 | 0.750 | 0.032 | 0.015 | 1065 | 407 | 407 |
| 5MP12D205_ | CFR13ALB205_ | 2 | 0.534 ±0.062 | 0.938 | 0.032 | 0.012 | 703 | 528 | 264 |
| 5MP12D305_ | CFR13ALB305_ | 3 | 0.624 ±0.093 | 0.938 | 0.040 | 0.011 | 574 | 790 | 263 |
| 5MP12D505_ | CFR13ALB505_ | 5 | 0.640 ±0.093 | 1.250 | 0.040 | 0.100 | 385 | 828 | 166 |
| 5MP12D106_ | CFR13ALB106_ | 10 | 0.805 ±0.093 | 1.500 | 0.040 | 0.009 | 248 | 1280 | 128 |
| 5MP12D206_ | CFR13ALB206_ | 20 | 0.875 ±0.125 | 2.250 | 0.040 | 0.008 | 141 | 1517 | 76 |
| 5MP12D306_ | CFR13ALB306_ | 30 | 1.075 ±0.125 | 2.250 | 0.040 | 0.006 | 115 | 2277 | 76 |
| 5MP12D506_ | Not Available | 50 | 1.375 ±0.125 | 2.250 | 0.040 | 0.004 | 89 | 3795 | 76 |
| 5MP12F105_ | CFR13ALC105_ | 1 | 0.450 ±0.062 | 1.250 | 0.032 | 0.020 | 861 | 250 | 250 |
| 5MP12F205_ | CFR13ALC205_ | 2 | 0.605 ±0.093 | 1.250 | 0.032 | 0.015 | 609 | 498 | 249 |
| 5MP12F305_ | CFR13ALC305_ | 3 | 0.654 ±0.093 | 1.500 | 0.040 | 0.013 | 452 | 576 | 192 |
| 5MP12F505_ | CFR13ALC505_ | 5 | 0.769 ±0.093 | 1.750 | 0.040 | 0.011 | 323 | 782 | 156 |
| 5MP12F106_ | CFR13ALC106_ | 10 | 0.905 ±0.125 | 2.250 | 0.040 | 0.009 | 200 | 1139 | 114 |
| 5MP12F206_ | CFR13ALC206_ | 20 | 1.315 ±0.125 | 2.250 | 0.040 | 0.006 | 141 | 2277 | 114 |
| 5MP12J105_ | CFR13ALE105_ | 1 | 0.620 ±0.093 | 1.500 | 0.040 | 0.019 | 784 | 319 | 319 |
| 5MP12J205_ | CFR13ALE205_ | 2 | 0.802 ±0.093 | 1.750 | 0.040 | 0.015 | 511 | 521 | 260 |
| 5MP12J305_ | CFR13ALE305_ | 3 | 0.961 ±0.125 | 1.750 | 0.040 | 0.012 | 417 | 781 | 260 |
| 5MP12J505_ | CFR13ALE505_ | 5 | 1.067 ±0.125 | 2.250 | 0.040 | 0.010 | 283 | 950 | 190 |
| 5MP12J106_ | CFR13ALE106_ | 10 | 1.543 ±0.125 | 2.250 | 0.040 | 0.006 | 200 | 1898 | 190 |
| Note: The tenth character of the EC part number represents the capacitance tolerance: M=±20%, K=±10%, J=±5%. | |||||||||
| EC PART NUMBER | EQUIVALENT MILITARY DESIGNATION | CAP µF | D | L | L1 | ESR Ohms 20-100 kHz Max | Fres kHz | I PEAK AMPS | dv/dt (V/µs) |
| 5MP16D105_ | CFR14LLB105_ | 1 | 0.469 ±0.062 | 0.922 | 1.640 | 0.015 | 949 | 407 | 407 |
| 5MP16D205_ | CFR14LLB205_ | 2 | 0.534 ±0.062 | 1.110 | 1.828 | 0.012 | 617 | 528 | 264 |
| 5MP16D305_ | CFR14LLB305_ | 3 | 0.624 ±0.093 | 1.110 | 1.828 | 0.011 | 504 | 790 | 263 |
| 5MP16D505_ | CFR14LLB505_ | 5 | 0.640 ±0.093 | 1.422 | 2.140 | 0.100 | 347 | 828 | 166 |
| 5MP16D106_ | CFR14LLB106_ | 10 | 0.805 ±0.093 | 1.672 | 2.390 | 0.009 | 227 | 1280 | 128 |
| 5MP16D206_ | CFR14LLB206_ | 20 | 0.875 ±0.125 | 2.422 | 3.140 | 0.008 | 133 | 1517 | 76 |
| 5MP16D306_ | CFR14LLB306_ | 30 | 1.075 ±0.125 | 2.422 | 3.140 | 0.006 | 108 | 2277 | 76 |
| 5MP16D506_ | Not Available | 50 | 1.375 ±0.125 | 2.422 | 3.140 | 0.004 | 84 | 3795 | 76 |
| 5MP16F105_ | CFR14LLC105_ | 1 | 0.450 ±0.062 | 1.422 | 2.140 | 0.020 | 776 | 250 | 250 |
| 5MP16F205_ | CFR14LLC205_ | 2 | 0.605 ±0.093 | 1.422 | 2.140 | 0.015 | 548 | 498 | 249 |
| 5MP16F305_ | CFR14LLC305_ | 3 | 0.654 ±0.093 | 1.672 | 2.390 | 0.013 | 414 | 576 | 192 |
| 5MP16F505_ | CFR14LLC505_ | 5 | 0.769 ±0.093 | 1.922 | 2.640 | 0.011 | 299 | 782 | 156 |
| 5MP16F106_ | CFR14LLC106_ | 10 | 0.905 ±0.125 | 2.422 | 3.140 | 0.009 | 188 | 1139 | 114 |
| 5MP16F206_ | CFR14LLC206_ | 20 | 1.315 ±0.125 | 2.422 | 3.140 | 0.006 | 133 | 2277 | 114 |
| 5MP16J105_ | CFR14LLE105_ | 1 | 0.620 ±0.093 | 1.672 | 2.390 | 0.019 | 716 | 319 | 319 |
| 5MP16J205_ | CFR14LLE205_ | 2 | 0.802 ±0.093 | 1.922 | 2.640 | 0.015 | 472 | 521 | 260 |
| 5MP16J305_ | CFR14LLE305_ | 3 | 0.961 ±0.125 | 1.922 | 2.640 | 0.012 | 386 | 781 | 260 |
| 5MP16J505_ | CFR14LLE505_ | 5 | 1.067 ±0.125 | 2.422 | 3.140 | 0.010 | 265 | 950 | 190 |
| 5MP16J106_ | CFR14LLE106_ | 10 | 1.543 ±0.125 | 2.422 | 3.140 | 0.006 | 188 | 1898 | 190 |
| Note: The tenth character of the EC part number represents the capacitance tolerance: M=±20%, K=±10%, J=±5%. | |||||||||
| EC PART NUMBER | EQUIVALENT MILITARY DESIGNATION | MAXIMUM RIPPLE CURRENT (AMPS RMS) 20-100 kHz | ||||||
| CASE TEMPERATURE | ||||||||
| 25°C | 35°C | 45°C | 55°C | 65°C | 75°C | 85°C | ||
| 5MP12D105_ | CFR13ALB105_ | 9.2 | 8.5 | 7.8 | 7.0 | 6.0 | 4.9 | 4.5 |
| 5MP12D205_ | CFR13ALB205_ | 10.8 | 10.0 | 9.1 | 8.2 | 7.0 | 5.8 | 5.3 |
| 5MP12D305_ | CFR13ALB305_ | 12.1 | 11.2 | 10.3 | 9.2 | 8.0 | 6.5 | 5.9 |
| 5MP12D505_ | CFR13ALB505_ | 13.8 | 12.7 | 11.6 | 10.4 | 9.0 | 7.4 | 6.7 |
| 5MP12D106_ | CFR13ALB106_ | 15.0 | 15.0 | 14.2 | 12.7 | 11.0 | 9.0 | 8.2 |
| 5MP12D206_ | CFR13ALB206_ | 15.0 | 15.0 | 15.0 | 15.0 | 13.6 | 11.1 | 10.0 |
| 5MP12D306_ | CFR13ALB306_ | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 | 12.4 | 11.4 |
| 5MP12D506_ | Not Available | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 | 13.6 | 12.4 |
| 5MP12F105_ | CFR13ALC105_ | 7.3 | 7.3 | 7.3 | 7.3 | 7.2 | 5.9 | 5.4 |
| 5MP12F205_ | CFR13ALC205_ | 12.0 | 12.0 | 11.3 | 10.1 | 8.7 | 7.1 | 6.5 |
| 5MP12F305_ | CFR13ALC305_ | 15.0 | 13.8 | 12.6 | 11.3 | 9.8 | 8.0 | 7.3 |
| 5MP12F505_ | CFR13ALC505_ | 15.0 | 15.0 | 14.7 | 13.1 | 11.4 | 9.3 | 8.5 |
| 5MP12F106_ | CFR13ALC106_ | 15.0 | 15.0 | 15.0 | 15.0 | 13.8 | 11.3 | 10.3 |
| 5MP12F206_ | CFR13ALC206_ | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 | 14.1 | 12.8 |
| 5MP12J105_ | CFR13ALE105_ | 9.5 | 9.5 | 9.5 | 9.5 | 9.5 | 7.8 | 7.1 |
| 5MP12J205_ | CFR13ALE205_ | 15.0 | 15.0 | 15.0 | 13.4 | 11.6 | 9.5 | 8.7 |
| 5MP12J305_ | CFR13ALE305_ | 15.0 | 15.0 | 15.0 | 15.0 | 13.1 | 10.7 | 9.8 |
| 5MP12J505_ | CFR13ALE505_ | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 | 12.5 | 11.4 |
| 5MP12J106_ | CFR13ALE106_ | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 | 14.1 |
| 5MP16D105_ | CFR14LLB105_ | 10.3 | 9.5 | 8.7 | 7.8 | 6.7 | 5.5 | 5.0 |
| 5MP16D205_ | CFR14LLB205_ | 12.0 | 11.0 | 10.0 | 8.9 | 7.8 | 6.3 | 5.8 |
| 5MP16D305_ | CFR14LLB305_ | 13.3 | 12.3 | 11.2 | 10.0 | 8.7 | 7.1 | 6.5 |
| 5MP16D505_ | CFR14LLB505_ | 14.8 | 13.7 | 12.5 | 11.2 | 9.7 | 7.9 | 7.2 |
| 5MP16D106_ | CFR14LLB106_ | 17.8 | 16.5 | 15.0 | 13.5 | 11.7 | 9.5 | 8.7 |
| 5MP16D206_ | CFR14LLB206_ | 21.6 | 20.0 | 18.3 | 16.4 | 14.2 | 11.6 | 10.6 |
| 5MP16D306_ | CFR14LLB306_ | 24.3 | 22.5 | 20.5 | 18.4 | 15.9 | 13.0 | 11.9 |
| 5MP16D506_ | Not Available | 29.6 | 27.3 | 25.5 | 23.6 | 20.6 | 20.0 | 19.7 |
| 5MP16F105_ | CFR14LLC105_ | 7.3 | 7.3 | 7.3 | 7.3 | 7.3 | 6.4 | 5.8 |
| 5MP16F205_ | CFR14LLC205_ | 14.3 | 13.3 | 12.1 | 10.8 | 9.4 | 7.7 | 7.0 |
| 5MP16F305_ | CFR14LLC305_ | 15.9 | 14.7 | 13.5 | 12.0 | 10.4 | 8.5 | 7.8 |
| 5MP16F505_ | CFR14LLC505_ | 18.3 | 17.0 | 15.5 | 13.9 | 12.0 | 9.8 | 8.9 |
| 5MP16F106_ | CFR14LLC106_ | 22.4 | 20.7 | 18.9 | 16.9 | 14.6 | 12.0 | 10.9 |
| 5MP16F206_ | CFR14LLC206_ | 27.4 | 25.4 | 23.2 | 20.7 | 17.9 | 14.7 | 13.4 |
| 5MP16J105_ | CFR14LLE105_ | 9.5 | 9.5 | 9.5 | 9.5 | 9.5 | 8.3 | 7.5 |
| 5MP16J205_ | CFR14LLE205_ | 15.0 | 15.0 | 15.0 | 14.2 | 12.3 | 10.0 | 9.1 |
| 5MP16J305_ | CFR14LLE305_ | 21.1 | 19.5 | 17.8 | 15.9 | 13.8 | 11.3 | 10.3 |
| 5MP16J505_ | CFR14LLE505_ | 24.4 | 22.6 | 20.6 | 18.5 | 16.0 | 13.1 | 11.9 |
| 5MP16J106_ | CFR14LLE106_ | 30.0 | 27.8 | 25.4 | 22.7 | 19.7 | 16.1 | 14.7 |
| Note: The tenth character of the EC part number represents the capacitance tolerance: M=±20%, K=±10%, J=±5% | ||||||||
Insulation Resistance
- At 25C: 400,000 Megohms / Microfarad for 0 to 0.50uF
- At 25C: 200,000 Megohms / Microfarad for Greater than 0.50uF
- At 85C: 20,000 Megohms / Microfarad for 0 to 0.50uF
- At 85C: 10,000 Megohms / Microfarad for Greater than 0.50uF
- At 105C: 2,000 Megohms / Microfarad for 0 to 0.50uF
- At 105C: 1,000 Megohms / Microfarad for Greater than 0.50uF
Dielectric Strength
Capacitors shall withstand a DC potential of twice rated voltage for one (1) minute through a limiting resistance of 100 ohms/volt without damage or breakdown.
Capacitance Change
| Temperature (°C) | -55 | 25 | 105 |
|---|---|---|---|
| Percentage Change (typical) | 2.0 | 0 | -4.0 |
| Capacitance Change | |||
Dissipation Factor
When measured at the frequency specified for capacitance measurement, the dissipation factor shall not exceed 0.1%.
- 5MP12/MIL Style CFR13 – Wrap and fill axial leads
- 5MP16/MIL Style CFR14 – Wrap and fill lug terminations
