Switching power supply capacitors that require snubber and high current applications. Voltage: 400 to 2000VDC: Capacitance as high as l0.0µf; ESR as low as 0.005OHMS; ESL as low as 18nH; RMS current to 48.4amps; UL94-VO flame retardant; three configuration
Until now, the prevailing wisdom had been that all brands of polypropylene capacitors were virtually identical. The new Electronic Concepts 5MP2 Series is proof that this is no longer the case.
Electronic Concepts is the only major manufacturer to offer polypropylene capacitors in three different configurations. Each is designed to fill a specific mechanical layout requirement; encompassing such parameter goals as optimizing pcb density or spacing. Now for the first time the circuit design dictates which EC capacitor to select!
In addition, because radial tab terminals are available, greater reliability can be realized, especially in hostile environments such as shock and vibration. Tabs also allow for lower inductance and higher RMS current carrying capacities versus other brands that can only be specified with wire leads. In addition, tabs offer the option of surface mounting.
The 5MP2 series capacitor is designed to
operate under demanding conditions
in such applications as:
Power conditioning systems
General circuit protection
Switch Mode Filtering
Low inductance, impedance and ESR