North America 732 542-7880
Europe 353(91)552432

5MP1 Series - Metallized Polypropylene

Metallized Polypropylene and Military Styles CFR13 and CFR14."Hi-Rel" replacement for electrolytics for a broad range of commercial and military switching power supplies.

Key Features

  • No "roll-off" capacitance versus electrolytic
  • Resonant frequency of 1065KHz
  • Ripple current to 30amps
  • Capacitance as high as 50µf
  • Voltage protection: 200%
  • Low dielectric absorption

Home > Our Products > 5MP1 Series

Great for High Current, High Capacitance & Low ESR Applications

These 5MP1 metallized polypropylene capacitors are manufactured by using special techniques in order to achieve the optimum characteristics for high current, high capacitance, low ESR applications.

For Filter designs where capacitance of 50µF or less is suitable for the circuit, type 5MP affords the opportunity to utilize capacitors with ESR’s orders of magnitude better than those of electrolytics, thus providing the opportunity to improve general system design. These unique capacitors also exhibit none of the “roll-off” of capacitance with frequency often associated with electrolytics.

In addition to the features which make type 5MP particularly suitable for switching applications, they are also characterized by low losses. Other advantages of polypropylene are long term stability, retrace, low dielectric absorption, and high insulation resistance.

 

Additional Information

Capacitance Range

  • 1.0µF to 50.0µF.
  • Capacitance is measured at 25°C at/or referenced to a frequency of 1kHz.

Capacitance Tolerance

  • Standard tolerance is ±10%.
  • Tolerances of ±20% and ±5% are available.

Operating Temperature Range

  • -55°C to +105°C

Enclosure/ Construction

  • Mylar tape outer wrap.

Voltage Rating

  • DC working voltage ratings are from 100VDC to 400VDC

Quality Control

  • Capacitors are tested 100% for:
    • Capacitance tolerance
    • Dissipation Factor
    • Dielectric withstanding voltage
    • Insulation Resistance
    • Equivalent Series Resistance (ESR)

*Process and inspection data are maintained on file and available on special request.

Environmental

ParameterMethodCondition
Vibration204D
Shock213I
Humidity106
Thermal Shock107A
Life108F
Reference MIL-STD 202
EC PART NUMBEREQUIVALENT MILITARY DESIGNATIONCAP µFDLLead Dia.ESR Ohms 20-100 kHz MaxFres kHzI PEAK AMPSdv/dt (V/µs)
5MP12D105_CFR13ALB105_10.469   ±0.0620.7500.0320.0151065407407
5MP12D205_CFR13ALB205_20.534   ±0.0620.9380.0320.012703528264
5MP12D305_CFR13ALB305_30.624   ±0.0930.9380.0400.011574790263
5MP12D505_CFR13ALB505_50.640   ±0.0931.2500.0400.100385828166
5MP12D106_CFR13ALB106_100.805   ±0.0931.5000.0400.0092481280128
5MP12D206_CFR13ALB206_200.875   ±0.1252.2500.0400.008141151776
5MP12D306_CFR13ALB306_301.075   ±0.1252.2500.0400.006115227776
5MP12D506_Not Available501.375   ±0.1252.2500.0400.00489379576
5MP12F105_CFR13ALC105_10.450   ±0.0621.2500.0320.020861250250
5MP12F205_CFR13ALC205_20.605   ±0.0931.2500.0320.015609498249
5MP12F305_CFR13ALC305_30.654   ±0.0931.5000.0400.013452576192
5MP12F505_CFR13ALC505_50.769   ±0.0931.7500.0400.011323782156
5MP12F106_CFR13ALC106_100.905   ±0.1252.2500.0400.0092001139114
5MP12F206_CFR13ALC206_201.315   ±0.1252.2500.0400.0061412277114
5MP12J105_CFR13ALE105_10.620   ±0.0931.5000.0400.019784319319
5MP12J205_CFR13ALE205_20.802   ±0.0931.7500.0400.015511521260
5MP12J305_CFR13ALE305_30.961   ±0.1251.7500.0400.012417781260
5MP12J505_CFR13ALE505_51.067   ±0.1252.2500.0400.010283950190
5MP12J106_CFR13ALE106_101.543   ±0.1252.2500.0400.0062001898190
Note: The tenth character of the EC part number represents the capacitance tolerance: M=±20%, K=±10%, J=±5%.


EC PART NUMBEREQUIVALENT MILITARY DESIGNATIONCAP µFDLL1ESR Ohms 20-100 kHz MaxFres kHzI PEAK AMPSdv/dt (V/µs)
5MP16D105_CFR14LLB105_10.469   ±0.0620.9221.6400.015949407407
5MP16D205_CFR14LLB205_20.534   ±0.0621.1101.8280.012617528264
5MP16D305_CFR14LLB305_30.624   ±0.0931.1101.8280.011504790263
5MP16D505_CFR14LLB505_50.640   ±0.0931.4222.1400.100347828166
5MP16D106_CFR14LLB106_100.805   ±0.0931.6722.3900.0092271280128
5MP16D206_CFR14LLB206_200.875   ±0.1252.4223.1400.008133151776
5MP16D306_CFR14LLB306_301.075   ±0.1252.4223.1400.006108227776
5MP16D506_Not Available501.375   ±0.1252.4223.1400.00484379576
5MP16F105_CFR14LLC105_10.450  ±0.0621.4222.1400.020776250250
5MP16F205_CFR14LLC205_20.605   ±0.0931.4222.1400.015548498249
5MP16F305_CFR14LLC305_30.654   ±0.0931.6722.3900.013414576192
5MP16F505_CFR14LLC505_50.769   ±0.0931.9222.6400.011299782156
5MP16F106_CFR14LLC106_100.905   ±0.1252.4223.1400.0091881139114
5MP16F206_CFR14LLC206_201.315   ±0.1252.4223.1400.0061332277114
5MP16J105_CFR14LLE105_10.620   ±0.0931.6722.3900.019716319319
5MP16J205_CFR14LLE205_20.802   ±0.0931.9222.6400.015472521260
5MP16J305_CFR14LLE305_30.961   ±0.1251.9222.6400.012386781260
5MP16J505_CFR14LLE505_51.067   ±0.1252.4223.1400.010265950190
5MP16J106_CFR14LLE106_101.543   ±0.1252.4223.1400.0061881898190
Note: The tenth character of the EC part number represents the capacitance tolerance: M=±20%, K=±10%, J=±5%.


EC PART NUMBEREQUIVALENT MILITARY DESIGNATIONMAXIMUM RIPPLE CURRENT (AMPS RMS) 20-100 kHz   
CASE TEMPERATURE
25°C35°C45°C55°C65°C75°C85°C
5MP12D105_CFR13ALB105_9.28.57.87.06.04.94.5
5MP12D205_CFR13ALB205_10.810.09.18.27.05.85.3
5MP12D305_CFR13ALB305_12.111.210.39.28.06.55.9
5MP12D505_CFR13ALB505_13.812.711.610.49.07.46.7
5MP12D106_CFR13ALB106_15.015.014.212.711.09.08.2
5MP12D206_CFR13ALB206_15.015.015.015.013.611.110.0
5MP12D306_CFR13ALB306_15.015.015.015.015.012.411.4
5MP12D506_Not Available15.015.015.015.015.013.612.4
5MP12F105_CFR13ALC105_7.37.37.37.37.25.95.4
5MP12F205_CFR13ALC205_12.012.011.310.18.77.16.5
5MP12F305_CFR13ALC305_15.013.812.611.39.88.07.3
5MP12F505_CFR13ALC505_15.015.014.713.111.49.38.5
5MP12F106_CFR13ALC106_15.015.015.015.013.811.310.3
5MP12F206_CFR13ALC206_15.015.015.015.015.014.112.8
5MP12J105_CFR13ALE105_9.59.59.59.59.57.87.1
5MP12J205_CFR13ALE205_15.015.015.013.411.69.58.7
5MP12J305_CFR13ALE305_15.015.015.015.013.110.79.8
5MP12J505_CFR13ALE505_15.015.015.015.015.012.511.4
5MP12J106_CFR13ALE106_15.015.015.015.015.015.014.1
5MP16D105_CFR14LLB105_10.39.58.77.86.75.55.0
5MP16D205_CFR14LLB205_12.011.010.08.97.86.35.8
5MP16D305_CFR14LLB305_13.312.311.210.08.77.16.5
5MP16D505_CFR14LLB505_14.813.712.511.29.77.97.2
5MP16D106_CFR14LLB106_17.816.515.013.511.79.58.7
5MP16D206_CFR14LLB206_21.620.018.316.414.211.610.6
5MP16D306_CFR14LLB306_24.322.520.518.415.913.011.9
5MP16D506_Not Available29.627.325.523.620.620.019.7
5MP16F105_CFR14LLC105_7.37.37.37.37.36.45.8
5MP16F205_CFR14LLC205_14.313.312.110.89.47.77.0
5MP16F305_CFR14LLC305_15.914.713.512.010.48.57.8
5MP16F505_CFR14LLC505_18.317.015.513.912.09.88.9
5MP16F106_CFR14LLC106_22.420.718.916.914.612.010.9
5MP16F206_CFR14LLC206_27.425.423.220.717.914.713.4
5MP16J105_CFR14LLE105_9.59.59.59.59.58.37.5
5MP16J205_CFR14LLE205_15.015.015.014.212.310.09.1
5MP16J305_CFR14LLE305_21.119.517.815.913.811.310.3
5MP16J505_CFR14LLE505_24.422.620.618.516.013.111.9
5MP16J106_CFR14LLE106_30.027.825.422.719.716.114.7
Note: The tenth character of the EC part number represents the capacitance tolerance: M=±20%, K=±10%, J=±5%


5MP1_Mech

Insulation Resistance

Temperature (°C)2585105
Megaohms x Microfarads300,00030,0003,000
Insulation Resistance

 

ins-v-temp

 

Dielectric Strength

Capacitors shall withstand a DC potential of twice rated voltage for one (1) minute through a limiting resistance of 100 ohms/volt without damage or breakdown.

 

Capacitance Change

Temperature (°C)-5525105
Percentage Change (typical)2.00-4.0
Capacitance Change

 

cap-v-temp

 

Dissipation Factor

When measured at the frequency specified for capacitance measurement, the dissipation factor shall not exceed 0.1%.

 

diss-v-temp

  • 5MP12/MIL Style CFR13 – Wrap and fill axial leads
  • 5MP16/MIL Style CFR14 – Wrap and fill lug terminations