Key Features
- Operation to 175°C
- Compact configuration
- Direct plug-in spade lugs
- Low ESL and ESR
- High dv/dt
- High peak current
Home > Film Capacitors > 5HT Series
High Temperature Film & Foil Resonant Power Supply Capacitor
This series is specifically designed to meet the challenges of high temperature environments in resonant power supplies with operation to 175°C. The 5HT series meets the critical requirements of series resonant power supplies for high current carrying capabilities at lower capacitance values.
Additional Information
Capacitance Range
- 0.010µF to 0.100µF
Capacitance Tolerance
- Standard capacitance tolerance is ±10%
- Tolerance of ±5% is also available upon request
Operating Temperature Range
- -55°C to +175°C
Enclosure/ Construction
- High temperature film and foil potted in a thermo plastic housing.
Voltage Rating
- 400VDC
- 230VAC
Quality Control
- Capacitors are tested 100% for:
- Capacitance
- Tolerance
- Dissipation Factor
- Dielectric withstanding voltage
- Insulation Resistance
*Process and inspection data are maintained on file and available on special request.
Environmental
| Parameter | Method | Condition |
|---|---|---|
| Vibration | 204 | D |
| Shock | 213 | I |
| Humidity | 106 | – |
| Thermal Shock | 107 | F* |
| Life | 108 | F** |
| Reference MIL-STD 202 | ||
*The temperature at step 3 shall be set at 175°C instead of 150°C
**Life test conditions: 133% of rated voltage at 175°C
| PART NUMBER | CAP µF | VOLTAGE VDC | VOLTAGE VAC | ESR (ohms) 100 kHzESR | 100kHz (Arms) | dv/dt V/µs | I PEAK (AMPS) | ESL (nH) | Fres (MHz) | |||
| 25°C | 75°C | 125°C | 175°C | |||||||||
| 5HT46J103_ | 0.010 | 400 | 230 | 0.075 | 7.1 | 5.8 | 4.1 | 0.21 | 27,937 | 279 | 8.6 | 17.2 |
| 5HT46J123_ | 0.012 | 400 | 230 | 0.070 | 8.2 | 6.7 | 4.8 | 0.24 | 27,937 | 335 | 8.6 | 15.7 |
| 5HT46J153_ | 0.015 | 400 | 230 | 0.056 | 9.4 | 7.6 | 5.4 | 0.27 | 23,280 | 349 | 8.6 | 14.0 |
| 5HT46J183_ | 0.018 | 400 | 230 | 0.046 | 10.2 | 8.4 | 5.9 | 0.30 | 23,280 | 419 | 8.6 | 12.8 |
| 5HT46J223_ | 0.022 | 400 | 230 | 0.038 | 11.3 | 9.3 | 6.5 | 0.33 | 18,624 | 410 | 8.6 | 11.6 |
| 5HT46J273_ | 0.027 | 400 | 230 | 0.031 | 12.5 | 10.2 | 7.2 | 0.37 | 18,624 | 503 | 8.6 | 10.4 |
| 5HT46J333_ | 0.033 | 400 | 230 | 0.025 | 13.7 | 11.2 | 7.9 | 0.40 | 16,296 | 538 | 8.6 | 9.4 |
| 5HT46J393_ | 0.039 | 400 | 230 | 0.022 | 15.0 | 12.2 | 8.7 | 0.44 | 13,968 | 545 | 8.6 | 8.7 |
| 5HT46J473_ | 0.047 | 400 | 230 | 0.018 | 16.7 | 13.6 | 9.6 | 0.49 | 11,640 | 608 | 8.6 | 7.9 |
| 5HT46J563_ | 0.056 | 400 | 230 | 0.015 | 18.3 | 15.0 | 10.6 | 0.54 | 11,640 | 652 | 8.6 | 7.3 |
| 5HT46J683_ | 0.068 | 400 | 230 | 0.012 | 20.4 | 16.7 | 11.8 | 0.60 | 10,476 | 712 | 8.6 | 6.6 |
| 5HT46J823_ | 0.082 | 400 | 230 | 0.010 | 21.2 | 17.3 | 12.2 | 0.62 | 10,476 | 859 | 8.6 | 6.0 |
| 5HT46J104_ | 0.10 | 400 | 230 | 0.009 | 24.8 | 20.3 | 14.3 | 0.73 | 9,209 | 921 | 8.6 | 5.4 |
| TH | H | L | LS | ||||
| in. ±0.010 | mm ±0.254 | in. max | mm max | in. ±0.010 | mm ±0.254 | in. ±0.010 | mm ±0.254 |
| 0.500 | 12.700 | 0.730 | 18.542 | 0.645 | 16.383 | 0.500 | 12.700 |
Dielectric Strength
Capacitors withstand a DC potential of 1.5 x rated voltage for one (1) minute without damage or breakdown. Test voltage is applied and discharged through a minimum resistance of 100 OHMS per volt minimum.
Dissipation Factor
When measured at the frequency specified for capacitance measurement, the dissipation factor will not exceed 0.05%.
