Key Features
- High insulation resistance
- Extreme stability
- Close tolerance
Home > Film Capacitors > MP12 Series
Great for Precision Instruments, Communications & High Density Circuitry Applications
As pioneers in the use of Polypropylene as a capacitor dielectric, Electronic Concepts, Inc. has designed a full line of polypropylene and metallized polypropylene precision capacitors.
Among these in type MP12 metallized polypropylene precision capacitors which exhibit unique and outstanding electrical and environmental characteristics. The following are some of the most significant.
- Negligible shift in capacitance under long term exposure to humidity, operating life and temperature cycling.
- Insulation resistance, dielectric absorption and dissipation factor properties are all equivalent, or superior, to those of polystyrene.
Small size and weight savings equivalent to those of metallized polycarbonate capacitors, make type MP12 ideal for precision instruments, communications, and high density circuitry applications.
Polypropylene capacitors are excellent for all critical applications which require high insulation resistance, high Q, extreme stability, close tolerance, low dielectric absorption and dissipation factor. The temperature coefficient makes an excellent choice for high Q tuned circuits, precision filter circuits, pulse networks and RC circuits.
Additional Information
Capacitance Range
- 0.01µF to 10.0µF
Capacitance Tolerance
- Standard tolerance is ±10%.
- Tolerances of ±20%,±5%,±2%,±1% are available.
Operating Temperature Range
- -55°C to +105°C
Enclosure/ Construction
- Plastic film case with epoxy end seal.
Voltage Rating
- 150VDC to 600VDC
Quality Control
- Capacitors are tested 100% for:
- Capacitance
- Tolerance
- Dissipation Factor
- Dielectric withstanding voltage
- Insulation Resistance
- Equivalent Series Resistance (ESR)
*Process and inspection data are maintained on file and available on special request.
Environmental
| Parameter | Method | Condition |
|---|---|---|
| Vibration | 204 | D |
| Shock | 213 | I |
| Humidity | 106 | – |
| Thermal Shock | 107 | A |
| Thermal Shock | 108 | F |
| Reference MIL-STD 202 | ||
| EC PART NUMBER | CAP uF | 150 VDC | 200 VDC | 300 VDC | 400 VDC | 600 VDC | ||||||||||
| E | F | H | J | K | ||||||||||||
| D | L | AWG | D | L | AWG | D | L | AWG | D | L | AWG | D | L | AWG | ||
| MP12_103_ | 0.010 | 0.187 | 0.500 | 24 | 0.187 | 0.500 | 24 | 0.187 | 0.500 | 24 | 0.187 | 0.500 | 24 | 0.250 | 0.625 | 24 |
| MP12_123_ | 0.012 | 0.187 | 0.500 | 24 | 0.187 | 0.500 | 24 | 0.187 | 0.500 | 24 | 0.187 | 0.500 | 24 | 0.265 | 0.625 | 22 |
| MP12_153_ | 0.015 | 0.187 | 0.500 | 24 | 0.187 | 0.500 | 24 | 0.187 | 0.500 | 24 | 0.203 | 0.500 | 24 | 0.296 | 0.625 | 22 |
| MP12_183_ | 0.018 | 0.187 | 0.500 | 24 | 0.187 | 0.500 | 24 | 0.203 | 0.500 | 24 | 0.234 | 0.500 | 24 | 0.328 | 0.625 | 22 |
| MP12_223_ | 0.022 | 0.187 | 0.500 | 24 | 0.187 | 0.500 | 24 | 0.218 | 0.500 | 24 | 0.250 | 0.500 | 24 | 0.312 | 0.750 | 22 |
| MP12_273_ | 0.027 | 0.187 | 0.500 | 24 | 0.187 | 0.500 | 24 | 0.234 | 0.500 | 24 | 0.281 | 0.500 | 22 | 0.343 | 0.750 | 22 |
| MP12_333_ | 0.033 | 0.187 | 0.500 | 24 | 0.187 | 0.500 | 24 | 0.265 | 0.500 | 22 | 0.296 | 0.500 | 22 | 0.375 | 0.750 | 22 |
| MP12_393_ | 0.039 | 0.187 | 0.500 | 24 | 0.203 | 0.500 | 24 | 0.281 | 0.500 | 22 | 0.250 | 0.625 | 24 | 0.406 | 0.750 | 22 |
| MP12_473_ | 0.047 | 0.187 | 0.500 | 24 | 0.234 | 0.500 | 24 | 0.250 | 0.625 | 24 | 0.281 | 0.625 | 22 | 0.390 | 0.875 | 22 |
| MP12_563_ | 0.056 | 0.203 | 0.500 | 24 | 0.250 | 0.500 | 24 | 0.265 | 0.625 | 22 | 0.312 | 0.625 | 22 | 0.359 | 1.062 | 22 |
| MP12_683_ | 0.068 | 0.218 | 0.500 | 24 | 0.265 | 0.500 | 22 | 0.296 | 0.625 | 22 | 0.328 | 0.625 | 22 | 0.375 | 1.062 | 22 |
| MP12_823_ | 0.082 | 0.234 | 0.500 | 24 | 0.234 | 0.625 | 24 | 0.312 | 0.625 | 22 | 0.296 | 0.750 | 22 | 0.421 | 1.187 | 22 |
| MP12_104_ | 0.100 | 0.250 | 0.500 | 24 | 0.265 | 0.625 | 22 | 0.281 | 0.750 | 22 | 0.328 | 0.750 | 22 | 0.468 | 1.187 | 20 |
| MP12_124_ | 0.120 | 0.265 | 0.500 | 22 | 0.375 | 0.625 | 22 | 0.312 | 0.750 | 22 | 0.359 | 0.750 | 22 | 0.500 | 1.187 | 20 |
| MP12_154_ | 0.150 | 0.250 | 0.625 | 22 | 0.265 | 0.750 | 22 | 0.343 | 0.750 | 22 | 0.390 | 0.750 | 22 | 0.562 | 1.187 | 20 |
| MP12_184_ | 0.180 | 0.265 | 0.625 | 22 | 0.281 | 0.750 | 22 | 0.359 | 0.875 | 22 | 0.359 | 1.062 | 22 | 0.546 | 1.437 | 20 |
| MP12_224_ | 0.220 | 0.296 | 0.625 | 22 | 0.312 | 0.750 | 22 | 0.390 | 0.875 | 22 | 0.406 | 1.062 | 22 | 0.593 | 1.437 | 20 |
| MP12_274_ | 0.270 | 0.312 | 0.625 | 22 | 0.343 | 0.750 | 22 | 0.437 | 0.875 | 22 | 0.437 | 1.062 | 22 | 0.656 | 1.437 | 20 |
| MP12_334_ | 0.330 | 0.312 | 0.750 | 22 | 0.390 | 0.750 | 22 | 0.500 | 0.875 | 20 | 0.484 | 1.062 | 20 | 0.718 | 1.437 | 20 |
| MP12_394_ | 0.390 | 0.328 | 0.750 | 22 | 0.375 | 0.875 | 22 | 0.515 | 0.875 | 20 | 0.531 | 1.062 | 20 | 0.781 | 1.437 | 20 |
| MP12_474_ | 0.470 | 0.359 | 0.750 | 22 | 0.406 | 0.875 | 22 | 0.468 | 1.187 | 20 | 0.531 | 1.187 | 20 | 0.781 | 1.687 | 20 |
| MP12_564_ | 0.560 | 0.390 | 0.750 | 22 | 0.437 | 0.875 | 22 | 0.515 | 1.187 | 20 | 0.578 | 1.187 | 20 | 0.859 | 1.687 | 20 |
| MP12_684_ | 0.680 | 0.390 | 0.875 | 22 | 0.406 | 1.187 | 22 | 0.562 | 1.187 | 20 | 0.640 | 1.187 | 20 | 0.937 | 1.687 | 20 |
| MP12_824_ | 0.820 | 0.375 | 1.062 | 22 | 0.437 | 1.187 | 22 | 0.562 | 1.437 | 20 | 0.625 | 1.437 | 20 | 0.937 | 1.937 | 20 |
| MP12_105_ | 1.000 | 0.421 | 1.062 | 22 | 0.531 | 1.187 | 20 | 0.609 | 1.437 | 20 | 0.687 | 1.437 | 20 | 1.031 | 1.937 | 20 |
| MP12_125_ | 1.250 | 0.468 | 1.062 | 20 | 0.562 | 1.187 | 20 | 0.671 | 1.437 | 20 | 0.687 | 1.687 | 20 | 1.093 | 2.187 | 20 |
| MP12_155_ | 1.500 | 0.500 | 1.062 | 20 | 0.531 | 1.437 | 20 | 0.734 | 1.437 | 20 | 0.750 | 1.687 | 20 | 1.187 | 2.187 | 20 |
| MP12_205_ | 2.000 | 0.531 | 1.187 | 20 | 0.604 | 1.437 | 20 | 0.950 | 1.687 | 20 | 0.859 | 1.687 | 20 | 1.375 | 2.187 | 20 |
| MP12_305_ | 3.000 | 0.578 | 1.437 | 20 | 0.718 | 1.437 | 20 | 0.921 | 1.687 | 20 | 0.968 | 1.937 | 20 | - | - | - |
| MP12_405_ | 4.000 | 0.656 | 1.437 | 20 | 0.765 | 1.687 | 20 | 0.906 | 2.187 | 20 | 1.250 | 1.937 | 20 | - | - | - |
| MP12_505_ | 5.000 | 0.671 | 1.687 | 20 | 0.843 | 1.687 | 20 | 1.031 | 2.187 | 20 | 1.140 | 2.187 | 20 | - | - | - |
| MP12_605_ | 6.000 | 0.734 | 1.687 | 20 | 0.859 | 1.937 | 20 | 1.125 | 2.187 | 20 | 1.250 | 2.187 | 20 | - | - | - |
| MP12_805_ | 8.000 | 0.781 | 1.937 | 20 | 0.953 | 1.937 | 20 | 1.312 | 2.187 | 20 | - | - | - | - | - | - |
| MP12_905_ | 9.000 | 0.812 | 1.937 | 20 | 1.031 | 1.937 | 20 | - | - | - | - | - | - | - | - | - |
| MP12_106_ | 10.000 | 0.859 | 1.937 | 20 | 1.109 | 1.937 | 20 | - | - | - | - | - | - | - | - | - |
| Note: The fifth character of the part number represents DC voltage rating: (E=150 VDC, F=200 VDC, etc.) Additionally, the tenth character represents the capacitance tolerance: M=±20%, K=±10%, J=±5%, F=±1%. | ||||||||||||||||
| *The lead length is 1.5” minimum. The lead material is copper clad steel, solder coated. * | ||||||||||||||||
Tolerances:
- +3/32", -1/6"
Diameter:
- 0.249" and under +/-0.032"
- 0.250" to 0.500" +/-0.046"
- 0.501" and over +/-0.062"
- Wrap and Epoxy End Fill
